Miele Professional Little Giants Cooling down: the door is held shut until the water cools
To protect staff from scalding, the laundry machine keeps the door locked while the water in the drum is above 130°F.
Mon–Sat, 8am–8pm
- Mode, not a failure
- No repair needed
- Source: Miele Professional
Book a visit
Three short steps, about a minute.
or call (844) 571-4566
Loading appointment form…
The appointment form couldn’t load. Please try again.
What Cooling down
actually means.
To protect staff from scalding, the laundry machine keeps the door locked while the water in the drum is above 130°F. The message stays until the temperature falls, after a finished or stopped program.
Miele Professional commercial appliance display · also shown as Comfort cooling
What to do when Cooling down shows on the commercial applianceKind of codeMode, not a failure
Nothing on the unit has broken; the controller is reporting a state it chose or one somebody set. A defrost pauses cooling for a scheduled melt and shows a warmer air reading for a while, a combi asks for a delime or runs its clean cycle and locks the door until it ends, a dish machine or a laundry machine sits in energy save between busy periods, and a door-open reminder beeps after a long delivery. No part is needed: letting the cycle finish, or the key sequence in the manual, brings the unit back.
Usually leads toNo repair
Wait for the message to go out; the door unlocks by itself.
Shows up asCommercial Appliance Error Code on a Combi, Fryer, Dish Machine or Laundry Display
A commercial appliance error code appears as letters or numbers on a combi, fryer, reach-in controller, dish machine or laundry machine display, or as a flashing light or an alarm tone.
MakeMiele Professional
Miele Professional machines in a small business laundry are usually visited at the start of the day, before the first full load.
SourceMiele Professional PWM 908 Little Giants laundry machine operating and installation instructions, en-US M.-Nr. 12 805 440 (media.miele.com)
Miele Professional PWM 908 Little Giants machines with electric heating and drain pump or drain valve (en-US instructions M.-Nr. 12 805 440).
Before you book,
in this order.
Each step comes from Miele Professional's own guidance for Cooling down on its commercial appliances. Follow it to the end: the last card says whether this is a visit.
Wait for the message to go out; the door unlocks by itself.
Do not force the door handle while Cooling down shows.
If the message stays for a very long time with a cool drum, book a visit so the temperature sensing can be checked.
Cleared?
The code is gone from the controller, the box pulls down to its set point and holds it, the vat or the cavity reaches temperature and recovers on schedule, the rinse hits its heat and the drum finishes its spin, all without a new part. If the same code comes back within a week, or during the next busy shift, mention it when you book.
What not to do
Cooling down is a safety pause, not a door lock problem. A lock that is actually stuck shows The door lock is jammed.
What you may
notice with it.
The commercial appliance problem Cooling down tends to arrive with. Answer these at the commercial appliance before anyone is booked.
All problems
No repair indicated
Nothing to repair.
Nothing on the unit has broken; the controller is reporting a state it chose or one somebody set. A defrost pauses cooling for a scheduled melt and shows a warmer air reading for a while, a combi asks for a delime or runs its clean cycle and locks the door until it ends, a dish machine or a laundry machine sits in energy save between busy periods, and a door-open reminder beeps after a long delivery. No part is needed: letting the cycle finish, or the key sequence in the manual, brings the unit back.
Miele Professional
commercial appliances.
Miele Professional machines in a small business laundry are usually visited at the start of the day, before the first full load.
Miele Professional commercial appliance repairMore Miele Professional codes
Mode, not a failure on other makes
Commercial dish machines
Undercounter, door-type and conveyor dish machines with their booster heaters and chemical feeds, the warewashing station that washes and sanitizes every rack before it goes back on the line.
Commercial laundry equipment
Coin, card and app-paid front-load machines, washer-extractors, stacked units and tumble dryers in laundromats, multi-housing laundry rooms, hotels, gyms and on-premise laundries.
In Miele Professional's own words
To protect the user against scalding, the door cannot be opened if the suds temperature is higher than 130°F (55°C).
Every code on this site is taken from the manufacturer's documentation, never from a forum or a parts listing. Miele Professional PWM 908 Little Giants machines with electric heating and drain pump or drain valve (en-US instructions M.-Nr. 12 805 440).
Miele Professional Cooling down commercial appliance repair,
where we come out.
The same visit in every metro below: the code, the model number, and a diagnosis before any part is ordered.
All service areasTampa BayFL · 31 areas
Miami / South FloridaFL · 47 areas
New York MetroNY · 75 areas
HoustonTX · 36 areas
ChicagoIL · 50 areas
Los AngelesCA · 95 areas
San DiegoCA · 31 areas
Questions
about Cooling down.
Can I clear Cooling down myself?
Why can't we open the Miele Little Giants after a hot wash?
Can we skip the cool-down on a Miele PWM 908?
Is Comfort cooling the same thing?
Back to your everyday
Still showing Cooling down?
A booking with a code goes further when it has the code as shown, the model and serial from the data plate, and a word on whether the unit still holds temperature, heats, rinses or spins. With those three, the office can match the likely part to your unit the same day.