A row of front-load commercial laundry machines in an on-premise laundry, their round glass doors closed and drums empty, a folding table and a stack of clean white towels beside them, nobody at the machines.

Speed Queen E Ub1: the load could not be balanced

E Ub1 is the non-fatal unbalance message on Speed Queen commercial front-loads.

(844) 571-4566

Mon–Sat, 8am–8pm

  • Motors and drives
  • Commercial laundry machine repair
  • Source: Speed Queen

Book a visit

Three short steps, about a minute.

or call (844) 571-4566

What E Ub1
actually means.

E Ub1 is the non-fatal unbalance message on Speed Queen commercial front-loads. It usually follows a single heavy item, such as a rug, a pillow or a comforter, that wads to one side of the drum.

Speed Queen commercial appliance display · also shown as EUb1

What to do when E Ub1 shows on the commercial appliance

Before you book,
in this order.

Each step comes from Speed Queen's own guidance for E Ub1 on its commercial appliances. Follow it to the end: the last card says whether this is a visit.

01

Once the door unlocks on its own, unload the items and reload them spread loosely.

02

Add a couple of towels to a single heavy item so the weight can spread.

03

If E Ub1 shows on normal mixed loads, book a visit to check the suspension and the unbalance switch.

Still there?

It usually turns into commercial laundry machine repair. Book with the code and the model number.

What not to do

E Ub1 does not mean the machine is broken; it means this load would not balance. E Ub2 is the fatal version and points to wiring at the unbalance switch.

Where E Ub1 usually leads

Commercial laundry machine repair.

Laundry machine door lock, belt, bearings and seal, drain valve, inverter or motor; tumbler igniter, flame sensor, gas valve coil or airflow switch · moderate.

In Speed Queen's own words

Unable to balance load. Redistribute load and run cycle.
Speed Queen commercial front-load vended models, control manual 807870ENR5 (Alliance Laundry Systems)

Every code on this site is taken from the manufacturer's documentation, never from a forum or a parts listing. Speed Queen commercial front-load vended and card models listed in manual 807870ENR5, such as SFNNCASP116TW01 and STGNXASP116TW01.

Speed Queen E Ub1 commercial appliance repair,
where we come out.

The same visit in every metro below: the code, the model number, and a diagnosis before any part is ordered.

All service areas
A restaurant team working a busy commercial kitchen line.
For the heart of your home.

Questions
about E Ub1.

Can I clear E Ub1 myself?
Once the door unlocks on its own, unload the items and reload them spread loosely. If it comes back, it needs a visit.
Why are clothes still wet after E Ub1 on a Speed Queen?
An unbalanced load cannot be spun at full speed safely, so less water comes out. Reloading and running a spin usually fixes it.
What is the difference between E Ub1 and E Ub2 on a Speed Queen?
E Ub1 is a load problem you can fix by reloading. E Ub2 means the wires to the unbalance switch are broken or disconnected and needs a technician.
Can one Speed Queen show E Ub1 far more than its neighbors?
Yes, when its shock absorbers or springs are worn. That pattern is worth a visit before the machine starts walking.

Back to your everyday

Still showing E Ub1?

A booking with a code goes further when it has the code as shown, the model and serial from the data plate, and a word on whether the unit still holds temperature, heats, rinses or spins. With those three, the office can match the likely part to your unit the same day.

(844) 571-4566 Schedule a repair