A working restaurant cooking line under a stainless ventilation hood, two stainless gas fryers with baskets hanging above the oil, a flat griddle and a combi oven with a glass door beside them, the equipment clearly the subject, a cook seen only from behind and shoulders down at the far end of the line, warm kitchen light, small blue flames visible under the griddle.

Henny Penny
Restaurant Equipment Repair

Henny Penny equipment gets its visit once the unit is cool, any oil is down and the crew has logged the last load.

(844) 571-4566

Mon–Sat, 8am–8pm

  • 1 commercial appliance types
  • 6 problems we see
  • 16 error codes

Book a visit

Three short steps, about a minute.

or call (844) 571-4566

Henny Penny commercial appliances,
specifically.

Henny Penny builds fryers and hot-food equipment for restaurant chains and independents: pressure fryers, open fryers, combi ovens and heated holding cabinets. Most of our Henny Penny work is on pressure and open fryers, where the computer control keeps a log of its last errors that we read before opening a panel.

The Henny Penny lineup

The Henny Penny
lineup.

Henny Penny builds 1 of the 4 commercial appliance types this site covers. Which one decides how the visit is planned.

All commercial appliance types

What is particular
to Henny Penny.

We work on Henny Penny PFE and PFG pressure fryers, Evolution Elite and other open fryers, combi ovens and SmartHold and heated holding cabinets. Gas and electric models fail differently: gas fryers stop on ignition and airflow codes, electric fryers on element current codes.

Pressure changes the job

A Henny Penny pressure fryer seals its lid and cooks under pressure, and the lid will not unlock until the pot is back near zero. Lid gaskets, the deadweight valve and the safety relief valve all sit on the daily and quarterly checklist, and a fryer that will not build or release pressure is a stop, not a workaround.

The control remembers errors

The C1000 and C8000 controls keep an E-LOG of the last ten errors with the time each happened, in Info Mode. Reading that log tells us whether an E-code on the day of the visit is new or has been coming back for a week.

A red reset behind the door

A separate high limit watches the shortening and cuts the heat if it overheats. It must be reset by hand with a red button under the control panel once the oil has cooled, and a limit that trips twice points at the temperature control rather than the limit.

Filtering is part of the design

Henny Penny builds filtration into its fryers and asks for the shortening to be filtered every few cook cycles. Evolution Elite open fryers add automatic oil top-off, which keeps the level right but also means a top-off pump and reservoir to service.

Parts

Temperature probes, high limits, contactors, drain microswitches and ignition modules are matched to the fryer's model and serial number. Control and I/O boards are specific to the control generation, so we note which control the fryer carries before ordering.

Repair or replace

A Henny Penny fryer with a sound vat is nearly always worth repairing when a probe, limit, contactor or board fails. A vat that leaks or a pressure fryer whose lid mechanism is worn beyond adjustment is when replacement becomes worth pricing.

Book your Henny Penny visit

Not a
Henny Penny?

Henny Penny is one of 35 commercial appliance makes on this site. The other 34 each have a page of their own.

All 35 brands
A restaurant team working a busy commercial kitchen line.
For the heart of your home.

Questions about
Henny Penny commercial appliances.

How do I see past error codes on a Henny Penny fryer?
Press the two Info Mode buttons together until INFO MODE shows, then step to E-LOG. It lists the last ten errors and when they happened.
Why won't the lid open on my Henny Penny pressure fryer?
The lid stays locked until the pressure has dropped. Never force it; if the pressure gauge stays up after the cook ends, turn the fryer off and book a visit.
How often should a Henny Penny be filtered?
Henny Penny's pressure fryer manual asks for the shortening to be filtered every 3 to 6 cook cycles. Regular filtering also keeps probes and elements cleaner.
Do you repair Henny Penny holding cabinets?
Yes. SmartHold and heated holding cabinets have their own heaters, humidity controls and door seals, and we check them on the same visit as the fryers if you ask.

Back to your everyday

Book your Henny Penny visit.

Have the commercial appliance's model number ready — on Henny Penny it decides which parts come on the first visit.

(844) 571-4566 Schedule a repair